show callerid problem

Moderator: areski

show callerid problem

Postby atekkanat » Mon Dec 26, 2011 9:59 am

hi,
everthing works well when i start my campaign. But callerid that i describe "CallerID used to call the A-Leg" in campaign page does not shown in call. In the Voip call report page newfies shows described callerid in CallerİD field.

My provider support transfer my callerid and i use with Asterisk. There is not callerid problem.

How can i show my callerid? Any suggestions.

Thanks
atekkanat
 
Posts: 3
Joined: Tue Nov 15, 2011 3:29 pm

Re: show callerid problem

Postby areski » Mon Dec 26, 2011 8:11 pm

Hi,

The callerid are transmitted correctly here, I just run few more tests.

Do you see the callerID on your admin interface ?
http://domain:8008/admin/dialer_cdr/callrequest/
areski
Site Admin
 
Posts: 302
Joined: Tue Oct 18, 2011 5:28 pm

Re: show callerid problem

Postby atekkanat » Tue Dec 27, 2011 7:48 am

Hi,

Yes. I can see callerid in http://domain:9080/admin/dialer_cdr/callrequest .
atekkanat
 
Posts: 3
Joined: Tue Nov 15, 2011 3:29 pm

Re: show callerid problem

Postby areski » Tue Dec 27, 2011 9:20 am

You might have to try to troubleshoot this into Freeswitch to make sure you sent the correct format for CallerID
areski
Site Admin
 
Posts: 302
Joined: Tue Oct 18, 2011 5:28 pm

Re: show callerid problem

Postby wandido » Wed Dec 12, 2012 2:25 am

I have ran a campaign and I see sometimes that the caller ID changes from what I set to 8888888888. Why would it do that? is there a fix that I can make?
wandido
 
Posts: 7
Joined: Tue Dec 11, 2012 9:42 pm

Re: show callerid problem

Postby areski » Wed Dec 12, 2012 12:26 pm

The callerid is set to 888888888 if no callerid is defined in the campaign.

Code: Select all
    if not callerid:
        callerid = '8888888888'
areski
Site Admin
 
Posts: 302
Joined: Tue Oct 18, 2011 5:28 pm

Re: show callerid problem

Postby wandido » Wed Dec 12, 2012 4:39 pm

Understood that that is what will happen however I started the camaign and added a caller ID. started that campaign with 30 lines,

The caller ID shows for some numbers and for others it does not.

Could this be a resources issue? how many concurrent calls do you specify and what is the recommended server specification?
wandido
 
Posts: 7
Joined: Tue Dec 11, 2012 9:42 pm

Re: show callerid problem

Postby wandido » Wed Dec 12, 2012 4:45 pm

areski wrote:The callerid is set to 888888888 if no callerid is defined in the campaign.

Code: Select all
    if not callerid:
        callerid = '8888888888'


Whick file do I find this in and can I change the default ID to the one I need it to be?
wandido
 
Posts: 7
Joined: Tue Dec 11, 2012 9:42 pm

Re: show callerid problem

Postby areski » Wed Dec 12, 2012 4:48 pm

you can just do a quick search for 8888888888!
it s in telefonyhelper.py
areski
Site Admin
 
Posts: 302
Joined: Tue Oct 18, 2011 5:28 pm

Re: show callerid problem

Postby wandido » Wed Dec 12, 2012 5:56 pm

areski wrote:you can just do a quick search for 8888888888!
it s in telefonyhelper.py


Ok I will try this.

What is the recommended server specifications?
wandido
 
Posts: 7
Joined: Tue Dec 11, 2012 9:42 pm

Next

Return to Installation

Who is online

Users browsing this forum: No registered users and 28 guests

cron